AIR TUBE & Fitting

 AIR TUBE – PU HOSE-Polyurethane

Part No.    I.D(mm)    O.D(mm)    Length    Temperature      Working Pressure at 23°C (73.4 °F)
HUS2504    2.5    4    200M           -20°C~60°C       (-5°F ~+140°F)    150PSI (10Bar/1MPa)
    4    6    200M
    5    8    100M
    6.5    10    100M
    8    12    100M    135PSI (9Bar/0.9MPa)
    10    14    50M    100PSI (7Bar/0.7MPa)
    12    16    50M
    9.5    13.5    50M

6. Meet the international norms : ISO 14743, ISO 14746

＊  Ether-based polyurethane tube/ Polyurethane ether tube is also available.

Push in fitting QS
Flat Seal Pneumatic Fittings

Standard series
Wide range of variants: large selection for maximum flexibility in standard applications
PBT and nickel-plated brass
Operating media: compressed air, vacuum, (water)

pneumatic push-to-connect fitting, male, straight, nickel-plated brass body, nickel-plated brass threads, 3/8in tube to 1/4in NPT connection

     M5  X  4mm ; 1/8″ X 4mm ; 1/4″ X 4mm ; M5 X 6mm ; 1/8″ X 6mm ; 1/4″ X 6mm ; 3/8″ X 6mm ;
1/2″ X 6mm ; 1/8″ X 8mm ; 1/4″ X 8mm ; 3/8″ X 8mm ; 1/2″ X 8mm ; 1/8″ X  10mm ; 1/4″ X  10mm
3/8″ X  10mm ; 1/2″ X  10mm ; 1/4″ X 12mm ; 3/8″ X 12mm ; 1/2″ X 12mm ;

UNION STRAIGHT

Push-to-Connect Union Straight Pneumatic Fittings

Union straight fittings connect two tubes of the same diameter for an inline air connection. NITRA push-to-connect union straight pneumatic fittings have strong thermoplastic (PBT) housings with stainless steel tube gripping claws. Release rings are color coded to distinguish between inch (black) and metric (blue) sizes.

PUSH-TO-CONNECT-FITTING – ELBOW –

pneumatic push-to-connect fitting, male, elbow, rotating, thermoplastic (PBT) body, nickel-plated brass threads, 6mm tube to G1/4 BSPP connection

Gender    Male
Fitting Type    Elbow
Fitting Function    Rotating
Body Material    Thermoplastic (PBT)
Thread Material    Nickel-plated brass
Thread Sealant    Yes
Connection    6mm push-to-connect and G1/4 BSPP
Operating Pressure    -29.5in Hg to 150 psi
Operating Temperature    32 to 140 deg F
For Use With    Flexible pneumatic tubing

1/8″ X 4mm ~ 1/2″ X 16mm

UNION ELBOW – Pneumatic Pipe Fittings

Union elbow fittings connect two tubes of the same diameter at a right angle. XCPC push-to-connect union elbow pneumatic fittings have strong thermoplastic (PBT) housings with stainless steel tube gripping claws. Release rings are color coded to distinguish between inch (black) and metric (blue) sizes.

pneumatic push-to-connect fitting, elbow flow control valve, rotating, meter-in, thermoplastic (PBT) body, nickel-plated brass threads, 5/16in (8mm) tube to 1/8in NPT connection(s).

Fitting Type    Elbow flow control valve
Fitting Function    Rotating
Valve Function    Meter-in
Body Material    Thermoplastic (PBT)
Thread Material    Nickel-plated brass
Thread Sealant    Yes
Connection    1/8in NPT and 5/16in (8mm) push-to-connect
Operating Pressure    -29.5in Hg to 150 psi
Operating Temperature    32 to 140 deg F
For Use With    Flexible pneumatic tubing

Exhaust silencer – Silencer FILTER – Compressed air silencer

Long or short design
Metal version
Operating medium: compressed air
High temperature resistance up to 80°C
Slim overall width
Many different variants
Universal applications
Item    Pneumatic Exhaust silencer
Material    Sintered bronze
Exhaust Silencer Type    Cone
Maximum Operating Pressure    150 psi (10 bar)
Connection    1/8in male NPT

Series of silencers with filter in spherical sintered bronze and nipple in brass or copper plated steel, otherwise with both filter and nipple fully manufactured in sinterized spherical bronze.

pneumatic exhaust silencer, sintered bronze, cone, 1/8in male NPT.

Flat head air silencer pneumatic exhaust muffler G 1/8 1/4 3/8 1/2 3/4 G1 inch solenoid valve air silencer

silencer – Compressed air silencer
Item    Pneumatic Exhaust silencer
Material    Sintered bronze
Exhaust Silencer Type    Cone
Maximum Operating Pressure    150 psi (10 bar)
Connection    1/8in male NPT

Series of silencers with filter in spherical sintered bronze and nipple in brass or copper plated steel, otherwise with both filter and nipple fully manufactured in sinterized spherical bronze.
Brass Pneumatic Muffler Filter 1/8″ ~ 1” Male NPT Noise Reduce Air Solenoid Valve Silencer Connector
Maximum Pressure : 300PSI ; Max Operating Temp: 35F to 300F.
Easy to install and maintain, particularly suitable where space is limited. High noise reduction effect.
Widely used for Cylinders, Air cylinders, Solenoid valves, Crank cases, gear boxes, oil tanks, Pneumatic tools

XCPC 1/8 Male Thread Pneumatic Silencer Muffler Fitting, Top Adjustable Air Flow Speed Controller, Sintered Bronze Exhaust Muffler

– Sintered Bronze Exhaust Muffler used to reduce dynamic noise of the pneumatic components or device exhaust.
– SPECIFICATIONS: Brass Exhaust Muffler Thread Outer Diameter : 1/8 PT; Thread Length : 0.28″; Top can adjust the air flow speed.
– APPLICATION: Pneumatic Muffler used to diffuse air and muffler noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within OSHA noise
– ADVANTAGE: Sintered bronze filter element designed in many small holes drilled in the pipe wall, When the air flows through the small holes, gradually changing the audio frequency of the original airflow, thereby reducing noise.
– HIGH QUALITY MATERIAL: Bronze Exhaust Muffler made of copper, high pressure resistant, not easy to rust, not easy to trip, better noise reduction

Plastic Exhaust Air Silencer
Pneumatic Air Compressor Muffler Fitting 1/4″ NPT Compressed Exhaust Silencer
ْXCPC Plastic mufflers uses rugged polyethylene housing with polyvinyl foam element. It is compact, light weight and highly effective for noise reduction without excessive back pressure.
Compact muffler used to diffuse air and muffle noise from exhaust port of air valve, air cylinder & air tools.

Body Material ：Polyethylene with Polyvinyl Foam
Maximum Operating Pressure : 150 PSI
Operating Temperature : 14 to 140 F
Pneumatic muffler for sound pressure level reduction to 65 … 84 dB(A).
Compact design, polymer or die-cast, Barbed fitting or threaded connection

Elements can be easily cleaned with kerosene or similar cleaning solvent. All models are furnished with standard male pipe threads.

Unit should be mounted in a protective position free from excessive vibration , Hand tighten only.

Operating pressure for entire temperature range    0 bar … 16 bar
Operating pressure for entire temperature range    0 psi … 145 psi
Flow rate with respect to atmosphere        7,500 l/min
Corrosion resistance class (CRC)    1 – Low corrosion stress
Noise level                81 dB(A)
Ambient temperature                -10 °C … 70 °C
Product weight                75 g
Pneumatic connection            G1/2
Cushioning insert material            PE
Material of screwed trunnion            Aluminum
Note on materials    Free of copper and PTFE RoHS-compliant
Housing material                Aluminum

High-flow Aluminum Pneumatic Exhaust Silencers

 

An exhausting valve or cylinder port can make a lot of noise, and contaminants can enter a pneumatic system though an unprotected opening. Exhaust silencers quiet the sound of the escaping air and protect the system from dirt and debris. These aluminum-bodied NITRA silencers offer high flow rates and are available with NPT or R (BSPT) threaded connections.

Material    Aluminum
Exhaust Silencer Type    Cylindrical
Flow Coefficient    2
Maximum Operating Pressure    250 psi (17 bar)
Connection    1/8in male NPT

Manual valve – Push-to-Connect Hand Valves

push-to-connect hand valves allow manual control of the air supply anywhere on the machine. Both 2-way and 3-way valves are available with or without locking capability. Lockable valves keep the valve in a closed position during maintenance (lock-out/tag-out). 3-way valves relieve pressure downstream when in the closed position.

One-way flow control valve, in-line installation

SPEED CONTROLLER Special Purpose Pneumatic Fittings

Pneumatic devices combined with convenient push-to-connect fittings create lightweight, miniature versions of many popular system components, including regulators, gauges, flow controls, quick exhaust and hand valves. Easy to install, special-purpose fittings can be plumbed into a machine either permanently or for low-cost troubleshooting or testing.

 pneumatic push-to-connect fitting, inline flow control valve, thermoplastic (PBT) body, (2) 5/32in (4mm) tube connection

Union Y
pneumatic push-to-connect fitting, union Y, thermoplastic (PBT) body, (3) 1/4in tube connection(s).

popular one touch technology has been incorporated into this series where all the wetted metal parts are made from stainless steel. This fitting is suitable for use in CRT production for example where the use of copper must be avoided. Other applications include wash down or other environments that could corrode normal fittings. KG can be used for vacuum ?100 kPa and pressures up to 1 MPa (~150 PSI). This fitting is available in 27 different body styles, with connection sizes from M5 to + R(PT), and tube sizes from 4mm OD to 12 mm OD.

FITTING, UNION TEE REDUCING
Union T

pneumatic push-to-connect fitting, union tee, thermoplastic (PBT) body, (3) 1/4in tube connection(s).

Push-to-Connect Union Triple Branch Pneumatic Fittings

Union triple branch fittings form an air distribution point by connecting two tubes inline with three smaller tube branches at a right angle. NITRA push-to-connect union triple branch pneumatic fittings have strong thermoplastic (PBT) housings with stainless steel tube gripping claws. Release rings are color coded to distinguish between inch and metric sizes.

Push-to-Connect Union Cross Pneumatic Fittings

Union cross fittings connect four tubes of the same diameter at right angles (cross configuration) for branching air distribution. NITRA push-to-connect union cross pneumatic fittings have strong thermoplastic (PBT) housings with stainless steel tube gripping claws. Release rings are color coded to distinguish between inch (black) and metric (blue) sizes.

Bulkhead Union Pneumatic Air Fittings

Bulkhead union fittings connect two tubes through a panel or other barrier. it have strong nickel-plated brass bodies with stainless steel tube gripping claws. Release rings are color coded to distinguish between inch (black) and metric (blue) sizes. Inch and metric bulkhead fitting sizes available

it have a nickel-plated brass body and stainless steel tube gripping claws. For use with polyurethane tubing or nylon tubing.

XCPC Polyurethane and Nylon 12 tubing is easily connected by simply inserting the pneumatic tubing end into the bulkhead fitting. To release the tubing, press the circular release ring and the tubing can be easily pulled out.

One Touch Push to Connect Composite Fitting – Bulkhead Union (PMM)
Minimum Order Quantity: 10 Fittings
Fluid Type: Air Only
Working Pressure: 0 – 150 PSI
Working Temperature: 32 – 140F
Applicable Tubing: Polyurethane and Nylon

PLUG

pneumatic push-to-connect fitting, plug, thermoplastic (PBT) body, 1/4in plug-in connection(s)

Fitting Type    Plug
Body Material    Thermoplastic (PBT)
Thread Sealant    No
Connection    1/4in plug-in
Operating Pressure    -29.5in Hg to 150 psi
Operating Temperature    32 to 140 deg F